Home page

Solution

All categories

7. Coating Solution For Wooden Furniture

7.1 General wood furniture

Includes waterborne white primer, waterborne varnish, waterborne finish and other products

Product features

Using high-performance waterborne PU modified acrylic resin as the base material, adding all kinds of imported additives, fully combined with the characteristics of wood products, with the latest formula refined by modern production technology. With water as diluent, it is an environment-friendly and healthy product, healthy and environment-friendly, low VOC, Comply with EU health standards. It is suitable for doors, Windows, cabinets, tables and chairs and other wooden furniture, as well as outdoor wooden facilities such as pavilions, wood grids and corridors.

Construction guidance:

The construction site should be well ventilated. If the construction is carried out in a relatively closed place, effective auxiliary facilities, such as industrial fans and fans, should be adopted to strengthen the air circulation in the construction site.

Note that the leveling time is not less than 15 minutes, do not mix with other coatings and organic solvents.

The ambient temperature shall not be less than 5℃, and the surface temperature of the substrate shall be more than 3℃ higher than the dew point temperature

The relative humidity should be less than 80%. If it is continuously cloudy and the relative humidity exceeds 80%, stop construction.

7.2 Quick drying wood waterbased coating

Product features

Using the world's latest water-based environmental protection technology, the product not only has a fresh smell, dry speed express, large brushing area, but also has excellent construction performance and environmental performance. Water - based quick - drying series products include

Primer, solid paint, varnish, suitable for indoor wood protection, decoration, and all kinds of quick drying coating for wood stationery pencil., High hardness, full film, excellent adhesion, good recoating.

Construction guidance

Before use, please fully mix the water paint in the container. You can adjust the construction viscosity with clean water, and pay attention to the proportion of water not exceeding 5%. Avoid construction at low-temperature and high-humidity. The construction temperature should be 10-40°C and the humidity should be less than 75%. Construction is prohibited when the moisture content of the substrate is over 14%. At least 20 minutes between each painting. When the temperature is lower than 15℃, the interval time should be extended, wet touching and wet construction should be prohibited, and the polishing should be completely without bright spot.

In the construction of pencil and other stationery coating, the appropriate temperature and humidity conditions should be adjusted according to the actual environment to ensure the final quality standards. Generally recommended conditions: temperature: 35-40°C Humidity: 10-30%RH, It’s to better to use a special drying room and forced dehumidifier to ensure the stability of this condition.

Integrated High-Tech Materials Technology Enterprise

171211782@qq.com

Address: Building 4, Units 2 & 3, HaiGang Entrepreneurship Park, Lin'gang Economic Zone, Binhai New Area, Tianjin City