Home page

Solution

All categories

5. Coating Solutions For High-end Equipments

5.1 Wind power equipment supporting system

Waterborne epoxy zinc rich primer + waterborne epoxy iron intermediate paint + waterborne acrylic polyurethane topcoat

Product features

It has excellent salt spray resistance, long-term corrosion resistance, high hardness, high weather resistance, excellent chemical resistance, and has certain requirements for construction.

Construction guidance

The construction site should be well ventilated. If the construction is carried out in a relatively closed place, effective auxiliary facilities, such as industrial fans and fans, should be adopted to strengthen the air circulation in the construction site.

The ambient temperature shall not be less than 5℃, and the surface temperature of the substrate shall be more than 3℃， higher than the dew point temperature.

The relative humidity should be less than 80%. If it is continuously cloudy and the relative humidity exceeds 80%, it is recommended to stop construction or use auxiliary ventilation equipment to enhance air circulation and ensure normal dryness.

Do not work outdoors in rain, snow or dew. If the component has been constructed and the paint film is not dry, the method of tarpaulin shielding should be used to protect the paint film, or the component will be moved to indoor for protection.

5.2 Coating solution for Marine equipment

Waterborne epoxy zinc rich primer + waterborne epoxy iron intermediate paint + waterborne acrylic polyurethane topcoat

Product features

High gloss, high vividness, excellent flexibility, excellent water resistance, excellent chemical resistance, excellent heat resistance, excellent salt spray resistance, excellent weather resistance.

Construction guidance

The construction site should be well ventilated. If the construction is carried out in a relatively closed place, effective auxiliary facilities, such as industrial fans and fans, should be used to strengthen the air circulation in the construction site.

The ambient temperature shall not be less than 5℃, and the surface temperature of the substrate shall be more than 3℃ higher than the dew point temperature.

Integrated High-Tech Materials Technology Enterprise

171211782@qq.com

Address: Building 4, Units 2 & 3, HaiGang Entrepreneurship Park, Lin'gang Economic Zone, Binhai New Area, Tianjin City