News and Information

How to construct waterborne paint for children under high temperature?

How to construct waterborne paint for children under high temperature?

July to September is the season of the year with high average temperatures and abundant rainfall. Due to the inherent characteristics of children's waterborne paint, high temperature environment brings certain obstacles to the coating construction of children's waterborne paint, and a series of paint film defects such as pinhole, crack, edge shrinkage, flow hanging, adhesion and so on are easy to occur in the coating process. In view of the above problems of children's waterborne paint in the high temperature season, in order to ensure the coating effect, let's see how children's waterborne paint is constructed in the high temperature?

1. When spraying, 1/3 or 1/4 of the next line should be pressed to avoid leakage. When spraying quick-drying paint, spray should be sprayed sequentially, the effect of spray is not ideal.

2. The distance between the nozzle and the surface of the object is usually 30-40 cm. Too close to droop easily; Too far away, uneven paint mist, easy pitting. The nozzle is far from the surface of the object, and the fog scattered along the way can cause waste. The distance should be adjusted according to coating type, viscosity and pressure. The spraying distance of slow drying paint can be slightly longer, and the spraying distance of quick drying paint can be closer. When the viscosity is high, it can be closer; When the viscosity is low, it can be further. At high pressure, the distance can be further, at low pressure, the distance can be closer; A little closer, a little further, is a small adjustment between 10 mm and 50 mm, if beyond this range, it is difficult to get the required film.

3. The spray gun can move up, down, left and right. Run at a speed of 10-12m/min evenly, and the nozzle should be aimed at the surface of the object to minimize inclined spray. When spraying at both ends of the surface of the object, the hand holding the trigger of the spray gun should be released quickly to reduce the paint mist, because the two ends of the surface of the object usually need to be sprayed more than twice, which is prone to flow.

4. Pay attention to the wind direction when spraying paint in the outdoor open area (not suitable for strong wind). The operator should stand in the downwind direction to prevent the paint mist from blowing to the prepared paint film, which will make the particle surface ugly.

5. Spraying sequence: difficult before easy, inside after outside. First high after low, first small area, after a large area. In this way, water spray will not splash on the paint film spraying, damage the paint film spraying.

The construction of waterborne paint for children is a very careful work and requires suitable environmental conditions. In summer, the temperature is high, the weather changes greatly, thunderstorms are many, the light is strong. These climatic features have a great influence on temperature, humidity, illumination, ventilation, etc. The distance between children's waterborne paint and the ideal construction environment is slightly larger, which is easy to affect the construction.

So if we want children's waterborne paint to have better use effect, we should pay attention to the relevant content, we are the manufacturer of children's waterborne paint, if you want to know what children's waterborne paint, you can contact us. We're going to tell you more about it from different aspects.

Recommended News

Coating manufacturers share what is the role of coatings


We all know that paint is the world of paint, and paint is applied everywhere, so do you know why paint is applied? What are the functions? What is the effect? ​​Just for the sake of beauty? "Dependin

Paint manufacturers: what is water-based paint


Coatings that use water as a solvent or dispersion medium can be called water-based coatings. Depending on the type of binder in the coating, waterborne coatings can be divided into two broad categori

What is the role of "water", an important component of water-based coatings, shared by coating manufacturers?


Water is colorless, transparent, odorless, non-toxic and harmless, and is ubiquitous. The freezing point is 0 and the boiling point is 100, so water-based paints should be kept above 0. Water, chemica