Home page

Spray Polyurea Elastic Waterproof Coating

Environmentally friendly / Solid content /No solvent / No volatile organic compounds (VOC) / No pollution

Category:

Water Based waterproof coating

Keywords:

Water-based industrial coatings

Online Consultation

Features

* Solid content, no solvent, no volatile organic compounds (VOC), no pollution, environmentally friendly

* Fast curing, and can be sprayed on any curved surface, inclined surface and vertical surface without sagging; the construction period is short

* Excellent bonding performance, and can be bonded with various substrates (concrete, steel plate, wood board)

* The coating has excellent sealing, water resistance and water penetration resistance

* The coating is resistant to long-term immersion and corrosion of acid, alkali, salt and other media; it can be used as anti-corrosion material

* Good thermal stability of the coating: it can be used for a long time below 100 °C, and can withstand short-term thermal shock at 150 °C

* The coating still has good flexibility and mechanical properties below -40℃

* Excellent comprehensive physical and chemical properties: high tensile strength, high elongation, excellent crack following performance, excellent wear resistance and impact resistance

* Mechanized spraying construction, convenient construction, high efficiency, one-time construction can meet the design thickness requirements

Scope of application

* It is suitable for the exposed project of the inner waterproof layer of the concrete deck of the passenger dedicated line bridge

* Applicable to various construction, water conservancy and other waterproof projects

* Waterproofing and anti-corrosion engineering of chemical pipelines, cabin floors and deck passages of ships

* t is used for protective lining, wear-resistant, impact-resistant, non-slip floor, etc. in various environments

* The sprayed layer has no joints, which is suitable for waterproof construction of large-scale projects and special-shaped surfaces

* T-type products are suitable for construction in complex climate and environment

* P-type products are only suitable for construction in dry and warm environments. The temperature during construction should be 15-30 °C, and the relative humidity is easily below 75%

None

Water Based One Component Acrylic Waterproof Paint

Recommended Products