Water Based Wood Paint For Children (Varnish)
Purify formaldehyde / Graffiti resistance /Colour profusion / High standards bring good quality
Category:
Children's water-based wood paint
Keywords:
Water-based industrial coatings
Specification
2.5kg / 20kg
*Purify formaldehyde
*Graffiti resistance
*Colour profusion
Not only can clear free formaldehyde in indoor air ,but also strengthened the graffiti resistance and resistance to polluting products can meet the demand of different household collocation for the masses to build a fresh, clean, the household space of profusion, let beauty decorate your life.
Children paint waterborne wood paint through the "EU Toys EN71-3", "EU toys EN71-9" certification, GB/T 33394-2016 "Water Based Woodenware Coatiings for Children's room decoratiing"
Effect
varnish
White paint
Gloss
Matte
Gloss
Dilution
Dilute with water
Varnish
* The maximum amount of water added should not exceed 10% of the main paint (not more than 100 ml/kg ). Do not use polluted water
* White paint: the maximum amount of water should not exceed 20% of the main paint (not more than 200ml/kg ). Do not use polluted water
* After adding the diluted water be sure to mix it thoroughly and strain it through a cloth of about 200 mesh
Tool cleaning
Please use clean water to clean all tools in time after finishing painting
Construction temperature
Please do not work in wet or cold weather (temperature below 10℃, relative humidity above 85%), otherwise the expected coating effect cannot be achieved
Construction method
Brush coating
Spraying (Spraying is better)
Friendly reminder
Pay attention to protection during spraying operation
Note
* Be sure to follow the principle of thin coating for many times.
* One time too thick coating will bring soft film、blistering and other coating defects.
Paint consumption
* 10~12 square meters/kg (mixed liquid brush coating, dry film 30 microns meter)
* The actual amount of paint consumed will vary depending on the construction method、the roughness of wood surface、the thickness of paint film and the different construction environment.
Recoating time
Temperature 25℃
Humidity less than 75%
Surface dry
* 30 minutes total drying time: 3 hours
* Recoating time: more than 8 hours or the next day recoating. Such as low temperature or high humidity, recoating time should be extended accordingly or appropriate heating to dehumidify.
Storage
* Sealed storage in 5-35℃ cool and dry place, strictly prevent freezing.
* Avoid exposure to direct sunlight and high or low temperature.
Post-coating treatment
Because the paint film is flexible, it is necessary to use a knife or other sharp tools to protect doors、windows and other masking tape cut.
Previous page:
Next page:
Recommended Products
Recommended Products
Leave a Message Online
If you're interested in our products, please leave your email, and we'll get back to you as soon as possible. Thank you!