+
  • Water Based Wood Paint For Children(Matt Varnish)(1762825786569).jpg

Water Based Wood Paint For Children(Matt Varnish)

Purify formaldehyde / Graffiti resistance / Colour profusion / High standards bring good quality

Category:

Children's water-based wood paint

Keywords:

Water-based industrial coatings

Specification

2.5kg  / 20kg

*Purify formaldehyde

*Graffiti resistance

*Colour profusion

Not only can clear free formaldehyde in indoor air ,but also strengthened the graffiti resistance and resistance to polluting products can meet the demand of different household collocation for the masses to build a fresh, clean, the household space of profusion, let beauty decorate your life.

Children paint waterborne wood paint through the "EU Toys EN71-3", "EU toys EN71-9" certification, GB/T 33394-2016 "water based woodenware coatiings for Children's room decoratiing"

High standards bring good quality!

 

Effect

Varnish

White paint

 

Gloss

Matte

Gloss

 

Dilution

Dilute with water

 

Varnish 

The maximum amount of water added should not exceed 10% of the main paint (not more than 100 ml/kg ). Do not use polluted water.

 

White paint

* The maximum amount of water should not exceed 20% of the main paint (not more than 200ml/kg ).

* Do not use polluted water.

* After adding the diluted water, be sure to mix it thoroughly and strain it through a cloth of about 200 mesh.

 

Tool cleaning

Please use clean water to clean all tools in time after finishing painting

 

Construction temperature

Please do not work in wet or cold weather (temperature below 10℃, relative humidity above 85%),otherwise the expected coating effect cannot be achieved.

 

Construction method

Brush coating

Spraying (Spraying is better)

 

Friendly reminder

Please pay attention to protection during spraying operation

 

Note

Be sure to follow the principle of thin coating for many times.

One time too thick coating will bring soft film、blistering and other coating defects.

 

Paint consumption 

*10~12 square meters/kg (mixed liquid brush coating, dry film 30 microns meter)

*The actual amount of paint consumed will vary depending on the construction method 、the roughness of wood surface、 the thickness of paint film and the different construction environment.

 

Recoating time 

Temperature 25℃

Humidity less than 75%

 

Surface dry

30 minutes total drying time: 3 hours

 

Recoating time

*More than 8 hours, or the next day recoating

*Such as low temperature or high humidity 、recoating time should be extended accordingly、appropriate heating to dehumidify

 

Storage

*Sealed storage in 5-35℃ cool and dry place, strictly prevent freezing.

*Avoid exposure to direct sunlight and high or low temperature.

*Post-coating treatment: because the paint film is flexible, it is necessary to use a knife or other sharp tools to protect doors 、windows and other masking tape cut.

Recommended Products

Recommended Products

< 1234...16 > proceed page

Leave a Message Online

If you're interested in our products, please leave your email, and we'll get back to you as soon as possible. Thank you!