Home page

Water Based Metal Baking Enamel Paint

1. No free TDI, no added heavy metals 2. Excellent mechanical properties, good adhesion 3. Toughness, anti-adhesion 4. High gloss and good weather resistance 5. The film is full and the color is bright

Category:

Water Based metal drying paint series

Keywords:

Water-based industrial coatings

Online Consultation

Product features

* No free TDI, no added heavy metals

* Excellent mechanical properties, good adhesion

* Toughness, anti-adhesion

* High gloss and good weather resistance

* The film is full and the color is bright

* Dilute with 20-30% clean tap water directly, saving more than 30% of petroleum solvent

* Safety, environmental protection, occupational health protection

Application

Suitable for export automobile and agricultural equipment body, cargo box, bumper.

Export small mechanical and electrical equipment and construction machinery and other metal heavy substrate fields.

Construction conditions

Ambient temperature and base surface temperature should be between 10 ~ 35℃ coating. Choose the right construction method and the right construction tools.

After painting should be at room temperature leveling 3 to 5 minutes before entering the drying room, baking temperature should not be immediately adjusted to 130℃.

It is recommended to lower the first and then high, the recommended procedure is 50℃10 minutes, 130℃20 minutes.

Packing specification

20kg/barrel

Transportation

Transport as non-dangerous goods

Storage

This product should be stored in 5-35 ℃, cool, clean, dry place

Storage life is six months

Note

1. This product is water-based paint, can not be mixed with organic solvents or solvent based paint.

2. Mix well before use and adjust viscosity with appropriate amount of water.

3. When diluting this product, gradually add water to dilute to construction viscosity.

4. Soak the new brush in a mixture of washing powder and baking soda before use, and then rinse with clean water.

5. Wash tools with water immediately after use.

Standard parameters of water-based amino baking paint
Items	Indicator
	water based amino baking varnish	water based metal baking enamel paint	water based amino baking primer
Status in the container	No abnormality	No hard lumps after stirring and mixing , uniform status.	No hard lumps after stirring and mixing , uniform status.
Storage stability [(50±2)℃, 7d	No abnormality
Non volatile content, %≥	50	55	60
Fineness，μm ≤		20	50
Appearance of paint film	flat and smooth	flat and smooth	flat and matte
Drying time/min, 150℃ ≤	30	30	30
Bending test/mm ≤	1
Impact resistance/cm ≥	50
Cross-cut test/grade ≤		1	1
Gloss (60°)/unit value	agreed
Hardness (pencil) ≥	2H
Water resistance (50±1℃, 24h)	No abnormality
Salt water resistance (3%, NaCl, 96h)	No abnormality

Gasoline resistance，93#gasoline，24h	No abnormality