Home page

Water Based Two Component Epoxy Anticorrosive Topcoat

1. Non-toxic, non-flammable, environment friendly, body harmless<br> 2. Both dry and wet interface can be constructed<br> 3. Strong adhesion, good mechanical properties<br> 4. Water resistance, acid and alkali resistance, pollution resistance, acid rain resistance

Category:

Water Based heavy anti-corrosion series

Keywords:

Water-based industrial coatings

Online Consultation

Product features

* Non-toxic, non-flammable, environment friendly, body harmless

* Both dry and wet interface can be constructed

* Strong adhesion, good mechanical properties

* Water resistance, acid and alkali resistance, pollution resistance, acid rain resistance

* Excellent weather resistance, long service life, outstanding comprehensive economic benefits

Application

Used for anti-rust and anti-corrosion coating of ship, hull and superstructure, platform, wharf and other Marine facilities, railway passenger cars, automobiles, petrochemical equipment, steel components in metallurgy, electric power, food, textile and other industries, bridge tower and other outdoor steel structures, with decorative and excellent weather resistance

Painting interval

Substrate temperature 10℃ 20℃ 30℃

Shortest 4h 2h 1h

Maximum unrestricted

Packing specification

20kg/2kg barrel

Storage life

Stored in cool and dry place above 5℃ for one year

Transport

According to the standard transport of non-dangerous goods

Note

1. This product is water-based paint, can not be mixed with organic solvents or solvent based paint.

2. Mix evenly before use. When diluting the product, gradually add water to dilute it to the construction viscosity.

3. Mix lacquers for application according to requirement , avoiding waste.

4. Soak the new brush in a mixture of washing powder and baking soda for half an hour before use, and then rinse with water.

5. Wash tools with water immediately after use.

6. It is not suitable for construction when the temperature is lower than 0℃ and the relative humidity is higher than 85%.

Standard parameters of waterborne epoxy resin anti-corrosion coatings (refer to HG/T 4759-2014)
Items		indicator
		primer	Intermediate paint	topcoat
Status in the container		normal
Appearance of paint film		normal
Nonvolatile content%≥		40
Drying time	Surface dry, h≤	4
	hard dry, h≤	24
Bending test/mm≤		3
Impact resistance,kg.cm ≥		40
Cross-cut test/Grade ≤		1
Storage stability [(50±2)℃, 14d		normal
Volatile organic compound (VOC) content/(g/L)≤		200
Flash rust inhibition		normal
Water resistance (240h)		normal
Salt spray resistance (300h)		No blistering ,No rust,No shedding