Home page

Water Based Floor Paint

Environmental protection * Low carbon * Healthy and safety

Category:

Water Based floor coating

Keywords:

Water-based industrial coatings

Online Consultation

Water based floor paint products are made of high quality resin, curing agent, auxiliary agent, etc., refined by special process.All the products are made of water as diluent.

Advantage

*Environmental protection

*Low carbon

*Healthy and safety

Scope of application

* The coating of residential ground

* High-rise operation area

* Basement ground wall

* Office with high environmental protection requirements

* Family decoration ground

* Food factories / industrial factories / warehouses /electronic factories and other requirements of dust-free, clean , wear-resistant, decorative high places.

Features

1. Strong adhesion, high hardness, good wear resistance

2. Low VOC, environmental protection, low smell

3. No artificial addition of benzene, formaldehyde and other carcinogens in the production process

4. Color diversity, with air permeability

Instructions for use

* Remove the loose surface of the base ash, sand, oil, water and other attachments before construction

* A/B components according to the specified proportion of the accurate ratio, stirring time about 3-5 minutes to uniform, and then add an appropriate amount of water to adjust the construction viscosity.

* After mixing, the paint should be matured for no less than 5 minutes; Try to use within the specified time (30 minutes) to avoid too much ingredients at a time, resulting in waste; Gelled paint cannot be used.

* After each construction process is completely dry, the next process can be constructed (depending on the temperature at the site).

* During the construction of good ventilation environment, not in the environment temperature is less than 10℃, humidity is more than 80% of the state of construction.

* Construction is strictly prohibited from mixing with other coatings and organic solvents to prevent deterioration.

* Product construction system | gm type water-borne epoxy primer + general type of waterborne epoxy paint + universal waterborne epoxy, high-end water-based polyurethane the paint coat

* Tools cleaning | immediately after using water cleaning tools

Safety Precautions

* Hazard statement ：May cause eye irritation or skin allergic reaction if eyes or skin touch it.

* Preventive measures ：Children or pets are not allowed to get into the construction area, and the product in the place out of reach of children. Avoid inhaling gases, fumes, vapors, sprays, etc. Wear protective equipment during use, and clean hands and other contact parts after operation.

* Incident response ：If touch with skin or hair, rinse with plenty of soap and water. In case of eye contamination, rinse immediately with plenty of water and seek medical attention. Seek medical advice if skin irritation or rash develops.

* Safe storage : 5 ℃~35 ℃ under a cool and dry place, avoid direct sunlight. Keep container tightly sealed. Should be separated from strong acid, strong alkali, strong oxidant, food and animal feed storage. Do not pour the diluted paint back into the original package, please use the product as soon as possible after opening the can.

* Waste disposal paint waste disposal should conform to the state and local disposal regulations (please refer to the product safety specifications before disposal)

Execution standard

Conforms to the national standard GB/T 22374-2008 "floor coatings" in the relevant provisions

Note

The performance and application data of the products listed above are obtained under standard experimental conditions, but the actual use environment of the products is diverse and not subject to our constraints.

If you are not sure, welcome to contact Tianjin Xite New Materials Co. , LTD.

Standard Parameters of water based floor paint
Items		Indicator
Solids content,%		≥40
Fineness, μm		≤50
Apperance of paint film		flat and smooth
Drying time	surface dry，h	≥6
	hard dry，h	≥24
Hardness (Pencil)		≥2H
Wear resistance (750g/500r，Weightlesssness,g)		≤0.03
Adhesion（grade）		≤1
Compression strength（MPa）		≥80
Water resistance		48h ,No abnormality
Acid resistance（10%H2SO4）		48h ,No abnormality
Alkali resistance (15%NaOH)		48h ,No abnormality
Gasoline resistance ( 120#)		48h ,No abnormality