Home page

Engineering Case

All categories

Vessel / container

Release date:

2021-06-29 11:09

Source:

Cultural utensils xite wood fast drying water paint series products use the world's latest water-based environmental protection technology. This product not only has fresh smell, fast drying speed and large brushing area, but also has excellent construction performance and environmental protection performance.
Product series : Water based quick drying series products （ Primer, solid paint, varnish)
Main components
High performance waterborne polyurethane emulsion, natural wax, pigments and fillers
purpose
It is suitable for the protection and decoration of indoor wooden products, as well as the quick drying coating of various wooden stationery pencils
Product features:
■ low odor, environmental protection and fast drying speed
■ high hardness, full film
■ fast drying speed and convenient construction
■ good covering and large brushing area
■ excellent adhesion and good recoating property.
instructions:
■ good roller coating, spraying and pumping coating effects.
■ before use, please fully mix the water paint in the container evenly. The construction viscosity can be adjusted with clean water. Note that the proportion of water added shall not exceed 5%.
■ avoid low temperature and high humidity construction. The construction temperature is 10-40 ℃ and the humidity is less than 75%.
■ construction is prohibited when the moisture content of the substrate is greater than 14%.
■ each coat shall be applied at least 20 minutes apart. When the temperature is lower than 15 ℃, the interval shall be extended, wet touching construction is prohibited, and there shall be no bright spot during grinding.
■ one time thick coating is strictly prohibited, otherwise the paint film will be soft, misty, white or air holes and bubbles will appear.
■ the theoretical paint consumption is 5-10 ㎡ / L. due to the different roughness and dilution ratio of the actual construction surface, the paint consumption is also different
■ it is strictly prohibited to match with non company products and do not mix with other substances.
■ tools shall be cleaned. After construction, all tools and instruments shall be washed with clean water and dried immediately to prevent drying. The remaining paint solution shall be sealed and stored. If dry skin affects the use, it can be filtered with 100 mesh filter cloth before use.
matters needing attention
• environmental protection matters:
The content of harmful substances shall comply with the provisions of the national standard gb18581-2020 limit of harmful substances in wood coatings.
Comply with EU toy EN71-3 standard.